Write a Review

If you're looking for a versatile MTB shoe that can transition from hot laps in the park to cold beers at the base without missing a step, then look no further. The 2FO Roost Clip brings a casual, relaxed vibe with all the right DNA to get sendy on the bike. It combines a durable leather and textile upper, cushioned EVA foam midsole and relaxed fit last that can stand up to the rigors of daily trail use without sacrificing off-the-bike comfort and style. Last but not least, a SlipNot FG rubber sole delivers confident traction on and off the trail. - Approximate weight: 367g (1/2 pair, Size 42). - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Cushioned EVA foam midsole for comfort. - Extended length cleat slot (4mm) for rearward cleat set up option. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot FG rubber sole for confident traction. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Synthetic leather upper conforms to the foot and is built to last. - Two-bolt cleat pattern fits all major mountain pedals.

A rider's cockpit is a rider's sanctuary and the shifter is at the heart of it. Make any refinement, and it better have been made to elevate performance—the X01 Eagle shifter holds fast to these rules. It features a forged aluminum trigger to hold up better to the demands that X01 Eagle riders ask of their machines, and an enhanced lever feel rolling on sealed cartridge bearings, offering more precision through the range of its movement. - Forged aluminum trigger designed to better take abuse - Enhanced lever feel and precision - X01 Eagle Master colorway matches all cassettes and chains as part of the Eagle Colorsystem

When the sky grows cloudy, you'll love the added peace of mind you get when you're dry and visible in Endura's Luminite II Jacket. This waterproof, breathable jacket sports reflective accents and a three flash mode, handy LED light integrated into the rear pocket for added visibility, even in the dark. Take advantage of the zippered chest, rear, and handwarmer pockets to keep your food and tools safely stashed. Fully sealed seams and waterproof zips round out this foul-weather wunderkind, so that you'll be prepared for even torrential rains.

Just because winning an XC World Cup isn't on your to-do list, doesn't mean you don't value performance and comfort. Recon 2.0 is your shoe. Inspired by S-Works Recon, with Body Geometry comfort and efficiency, Recon 2.0 puts all that performance within easy reach. Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU-injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in-the-saddle performance. We've also lifted the heel for an even more natural feeling while walking. To create traction off the bike in wet or dry, gravel or dirt, we've covered the nylon outsole with our SlipNot compound. If the traction's needed in the wet, you can also rest easy knowing the XPEL mesh used through the Recon 2.0 won't get bogged down with water and will dry exceptionally quickly. No more wet shoes the morning after a wet ride. An L6-Snap Boa and a Velcro forefoot closure ensure micro-adjustable comfort with a secure fit designed for all-day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness index 6.0 - Welded upper reduces seams for superior step-in comfort. - BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 357g (1/2 pair, Size 42)

Design Philosophy The SingleTrack Trouser has been a core part of Endura's range for years and is a statement of our dominance in the bulletproof trail pant arena with a no-nonsense aesthetic and seriously durable fabrics – indestructible garment engineering. This version sees an improved on bike fit with significant pre-articulation and new tough stretch fabric to hold its position as THE go-to trail pant. Functional Detail The garment boasts zipped hand pockets as well as zipped thigh vents with mesh inserts for temperature regulation. It also has additional cargo pockets in the rear. The waistband has integrated stretch as well as Velcro® side waist adjusters. Clickfast™ Compatible The SingleTrack Trouser II has Clickfast™ poppers on the inner waistband which allow you to securely fix any Endura Clickfast liner shorts inside. Liner shorts all have internal padding providing improved comfort in the saddle. Key Benefits: - Tough durable nylon fabrics with large stretch panels - Zipped hand and phone pockets - Wicking waistband with Velcro adjusters - Critical twin and triple needle stitching - Clickfast-liner-compatible - Knee-pad-friendly cut - Zipped leg vents - The only trail pant you'll ever need

Performer Balance 12 Get the little ones started in the BMX world with the Performer kids line. Smaller wheels same good time thrills Frame100% Hi-Ten, 1" Threaded H/TFork100% Hi-Ten, 25mm Offset Rims Alloy Single Wall, 16hSpokesStainless Steel, 14gTiresGT NBS 2.25" Handlebar GT 2pc Freestyle, 100% Hi-Ten Steel, 5.1"H x 18.1"WGripsJunior Closed End Stem Alloy Frontload, QuilledHeadset1" Threaded, Steel Saddle GT Balance Combo w/ post, Integrated Guide Handle Seat post Combo Steel 22.2 Integrated SizesOS

- Wide pedal-to-shoe contact - Lower platform height for pedaling stability - Integrated cage increases stability and control when not clipped in and protects binding mechanism against impacts - Robust retention claws provide smooth engagement and release - Customize the entry and release tension settings - Strong, durable chrome-molly spindle with 8 mm hex wrench mount - Sealed mechanism - 1.0 mm cleat spacer included - Binding Dual sided - SM-SH51 Cleat included - Cleat retention adjuster - Integrated cage - Cartridge axle - Average weight: 438g - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD)

If you don't have to shovel your sidewalk to get your bike out for a winter ride, you probably don't need bib tights that are designed for freezing temperatures. Instead, you might be more comfortable in something like our Therminal Bib Knickers this winter. For the construction, they feature our Therminal fabric, which is designed to both insulate and manage moisture buildup. To do so, they have a brushed fleece interior with a light loft that pulls moisture away from skin to evaporate at the material's surface. This loft also has the added benefit of insulation, which occurs by trapping tiny pockets of warmth between the skin and the fabric. The result? Consistent warmth that doesn't come with the risk of overheating. As for the fit, they have an articulated design that conforms to your body. This means that the shorts and uppers will follow your movements, not work against them. And as a result, these bib knickers won't cause any chafing, unwanted rubbing, or pinching. For the insert, you'll find our Body Geometry 3D Contour Chamois. It features a variable density design that places support and padding where you need it, not where you don't. And as a result, you'll find that it significantly reduces pressure on soft tissue and nerves, creating a ride feel and degree of comfort that's nothing short of sublime. - Therminal fabrics feature remarkable insulating properties, astounding levels of breathability and moisture management, and a lightweight, brushed back fleece that's soft against the skin - Articulated cycling fit is designed to complement the body throughout the positions and movements of cycling, which eliminates any unwanted pinching, rubbing, or chafing. - Reflective elements increase your visibility to motorists in low-light conditions. - Body Geometry 3D Contour Chamois features a variable density design that places support and padding where you need it, not where you don't. This ensures that the chamois won't feel bulky or in the way of your pedal stroke. - Deflect UV 50+ protects against harmful UV rays. - 17-inch inseam (size Medium) - Fabric weight: 320g

The Specialized Power Arc Expert saddle expands on the success of the original Power saddle. It features the same channel, length, and hollow titanium rails as the original and Pro Arc, but where it differs is in its shell and padding. But this means that it still features a stiff composite shell and supple, Level 2 PU padding. The shape of the saddle is also designed to provide ample sit bone support, and this has been coupled with a shorter-than-usual nose section to keep pressure off of soft tissue while riding in aggressive positions. Specialized even took this ideology a step further via an extra wide and elongated Body Geometry channel that's been proven through blood flow testing and pressure mapping to reduce numbness and pressure on unwanted areas. And while this all seems familiar if you're already a Power loyalist, this iteration features a curved Body Geometry shape that better contours to your body. What does this mean for your ride? It means that you'll feel as if you're “in the saddle," not on it. And ultimately, this equates to greater comfort and superior performance in all seated positions, whether you're a man or woman. - Patented Body Geometry design is lab tested for both men and women to assure blood flow to sensitive arteries. - Lightweight and supportive PU padding for comfort and support on longer rides. - Lightweight, durable, and hollow titanium rails. - Level 2 padding: Medium density foam for bike feel with additional cushioning. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Size 143mm / Weight: 233g - Size 155mm / Weight: 235g - Size 168mm / Weight: 238g

Exploration is all about getting farther off the beaten path—and sometimes that path leads to some chilly temps. With the Adventure Thermal Bib Knicker w/ SWAT, you'll stay plenty warm and still have everything you need on your adventure within easy, comfortable reach—all without having to resort to a sweaty backpack or overloaded pockets bouncing around. - 17" inseam (size Medium) - Fabric Content: MAIN: 57% Polyamide, 28% Polyester, 15% Elastane; UPPER: 85% Polyester, 15% Elastane - Side leg pockets with secure zipper provide ample room to carry cargo. - Soft mesh bib uppers with binding provide a comfortable hold and keep your gear secure with three patented hanging SWAT pockets.

With our new Race-Series Tights, you can look Old Man Winter in the face and tell 'em to "bring the storm." Featuring a soft shell knit fabric, paired with insulating thermal panels, these bib tights keep you plenty warm on cold days, all without overheating. - Articulated cycling fit is designed to complement the body throughout the positions and movements of cycling, which eliminates any unwanted pinching, rubbing, or chafing. - Body Geometry 3D Contour chamois. - Fabric Content: SOFT SHELL: 44% Polyester, 38% Nylon, 14% Elastane, 4% PU; THERMAL: 84% Nylon, 16% Elastane; UPPER: 95% Polyester, 5% Spandex - Reflective elements increase your visibility to motorists in low-light conditions. - Soft Shell is a knit fabric with remarkable insulating properties, as well as being wind- and water-resistant and highly breathable. We've also included insulating Thermal panels in selective locations of the tights to further the overall warmth.

With our new Race-Series Bib Tights, you can look Old Man Winter in the face and tell 'em to "bring the storm." Featuring a soft shell knit fabric, paired with insulating thermal panels, these bib tights keep you plenty warm on cold days, all without overheating. - Articulated cycling fit is designed to complement the body throughout the positions and movements of cycling, which eliminates any unwanted pinching, rubbing, or chafing. - Body Geometry 3D Contour chamois. - Reflective elements increase your visibility to motorists in low-light conditions. - Soft Shell is a knit fabric with remarkable insulating properties, as well as being wind- and water-resistant and highly breathable. We've also included insulating Thermal panels in selective locations of the tights to further the overall warmth. Fabric Content: - SOFTSHELL: 44% Polyester, 38% Nylon, 14% Elastane, 4% PU - THERMAL: 84% Nylon, 16% Elastane - UPPER: 95% Polyester, 5% Spandex

Exploration is all about getting farther off the beaten path—and sometimes that path leads to some chilly temps. With the RBX Adventure Thermal Bib Knicker w/ SWAT, you'll stay plenty warm and still have everything you need on your adventure within easy, comfortable reach—all without having to resort to a sweaty backpack or overloaded pockets bouncing around. - 18" inseam (size Medium) - Fabric Content: MAIN: 57% Polyamide, 28% Polyester, 15% Elastane; UPPER: 85% Polyester, 15% Elastane - Side leg pockets with secure zipper provide ample room to carry cargo. - Soft mesh bib uppers with binding provide a comfortable hold and keep your gear - secure with three patented hanging SWAT pockets.

Our Trail Alpha Jacket utilizes Polartec® Alpha® to bring warmth to your cold-weather days. The soft, inside liner quickly evaporates sweat keeping you warm and dry. With a casual style, it's right at home on the trail or enjoying a post-ride beverage around the fire pit. - Exterior shell fabric is engineered to allow this jacket to breathe even better and move moisture from the insulation to the exterior to dry, keeping you dryer than ever before. - Fabric Content SHELL 85% Nylon, 15% Spandex - LINING 100% Polyester.

Whether you're going for style, protection, or a little of both, our Trail Pants are sure to be your go-to riding pant. We made them from a woven version of our lightweight and ultra-breathable VaporRize fabrics. As a result, the pants are more than tough enough to take repeated spills while you're finding your line (or losing it), without sacrificing anything to comfort. And to further this concept, they also include laser-perforated venting that's just as effective at dumping excess heat as mesh, only it doesn't create a weakness in the overall strength of the pants. In essence, this means that you won't find yourself blowing them out for a long time to come. In terms of fit, you'll find that these pants are plenty baggy enough to layer pads, but form-fitting enough to not get in the way. - Buckle waist adjustments ensure that the fit of the pant is easily customizable and dialed-in, even when your pockets are loaded. - Deflect UV 50+ protects your skin from harmful ultraviolet rays. - Designed to retain a loose and open rider-first fit while using pads and armor. - Fabric Content: MAIN FABRIC: 90% Nylon, 10% Elastane; OTHER: 82% Nylon, 18% Spandex - Laser-perforated venting adds sophisticated points of ventilation that don't detract from the durability or performance of the shorts. - Tapered leg helps to prevent anything getting caught in the chain. - Three zippered pockets provide ample, secure room to store everything that you need while you're out riding. - VaporRize woven fabrics are treated to be water-repellant, while remaining durable, stretchy, and lightweight for peace of mind on the mountain.

Our Trail-Series Alpha Jacket utilizes Polartec Alpha to bring warmth to your cold-weather days. The soft, inside liner quickly evaporates sweat keeping you warm and dry. With a casual style, it's right at home on the trail or enjoying a post-ride beverage around the fire pit. - Alpha technology eliminates the need for a backing fabric, which allows the fabric to be in direct contact with your skin. - The exterior shell fabric is engineered to breathe even better and move moisture from the insulation to the exterior to dryGÇökeeping you dryer than ever before. - Fabric Content: SHELL: 85% Nylon, 15% Spandex; LINING: 100% Polyester. - Lofted fibers keep you extremely warm while allowing sweat and heat to expel from your body. - Polartec Alpha Direct Insulation increases breathable performance in this super lightweight mid-layer. - Relaxed Fit Trail Jacket is loose and comfortable, and also provides plenty of room for layering underneath.

Our Trail-Series Alpha Jacket utilizes Polartec Alpha to bring warmth to your cold-weather days. The soft, inside liner quickly evaporates sweat keeping you warm and dry. With a casual style, it's right at home on the trail or enjoying a post-ride beverage around the fire pit. - Alpha technology eliminates the need for a backing fabric, which allows the fabric to be in direct contact with your skin. - The exterior shell fabric is engineered to breathe even better and move moisture from the insulation to the exterior to dryGÇökeeping you dryer than ever before. - Fabric Content: SHELL: 85% Nylon, 15% Spandex; LINING: 100% Polyester. - Lofted fibers keep you extremely warm while allowing sweat and heat to expel from your body. - Polartec Alpha Direct Insulation increases breathable performance in this super lightweight mid-layer. - Relaxed Fit Trail Jacket is loose and comfortable, and also provides plenty of room for layering underneath.

Cold legs make for bad rides, and bad rides are no fun. But, lucky for you, the Therminal Cycling Bib Tights take the sting out of Old Man Winter's wrath. For the construction, these bib tights feature our Therminal fabric, which is designed to both insulate and manage moisture buildup. To do so, it has a brushed fleece interior with a light loft that pulls moisture away from skin to evaporate it at the material's surface. This loft also has the added benefit of insulation, which occurs by trapping tiny pockets of warmth between the skin and the fabric. The result? Consistent warmth that doesn't come with the risk of overheating. And to take this principle a step further, we've also included ankle gaiters that create a sealed interface with covers or socks to keep the cold from infiltrating the legs. As for the fit, they have an articulated cycling design that conforms to the body within the cycling position. This means that throughout your movements, the fabrics will follow the body, not work against them. And as a result, these tights won't cause any chafing, unwanted rubbing, or abrasion. For the insert, you'll find our Body Geometry 3D Contour Chamois. It features a variable density design that places support and padding where you need it, not where you don't. Additionally, the chamois has a brushed face, providing a touch of added warmth and moisture management. - Therminal fabrics feature remarkable insulating properties, astounding levels of breathability and moisture management, and a lightweight, brushed back fleece that's soft against the skin. - Articulated cycling fit is designed to complement the body throughout the positions and movements of cycling, which eliminates any unwanted pinching, rubbing, or chafing. - Ankle gaiters interface perfectly with shoes and covers to prevent water and cold air from creeping up the legs. - Reflective elements increase your visibility to motorists in low-light conditions. - Body Geometry 3D Contour chamois - Deflect UV 50+ protects against harmful UV rays. - Fabric weight: 320g

For as long as there've been saddles, women have been having issues with them. But where some see unsolvable problems, we see practical solutions. We spent countless hours performing research and prototyping in order to give you the comfort that you've been rightfully longing for. With our patented design, Mimic technology helps create a saddle that perfectly adapts to your body to give you the support you need. And when you combine this technology with our Power Comp saddle, with its hollow Cr-Mo rails and level II padding for extra comfort, you get a high-performance saddle that's designed to help you perform at your best. It still features all of the Body Geometry design characteristics you know and love, so you can be assured of superior, all-day comfort in any ride position. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - Innovative Mimic technology uses multilayered materials to maintain equilibrium and minimize swelling in soft tissue. - Light, durable, and hollow Cr-Mo rails. - Level II padding: Medium density foam for bike feel with additional cushioning. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Weight: 220g

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert; allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 2.1 – 2.6" and rims with internal width 22 – 35mm Includes: - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions

- Outer pad is constructed of 600D + PVC. A durable denier fabric with herringbone weave and DWR treatment for water repellency - Micro-brushed inner lining protects your tailgate from rub and wear marks - Raised bumpers facing into the truck box seat most frames snugly preventing bikes from coming into contact while shuttling - Raised square pads along the outer tailgate (small pad only) offer the additional security of holding forks in place - When the shuttle gets steep and rowdy, secure frames down with a Velcro-backed webbing loop and strap system - Grommet system offers the ability to lock bikes - Storage pocket - Two sizes - Small - 39.5" x 57" wide with 5 straps, Large - 47” x 61” wide with 6 straps

PD-R7000 NEW FEATURE - Carbon fiber reinforced resin pedal body - Wide contact area - 265g/pr (25g/pr lighter than PD-5800) BENEFIT - Optimum power transfer - Lightweight - Aerodynamic image - Color: CFRP - Average weight: 265 g - Road clearance: 31° - Binding: Single Sided - Cleat included: SM-SH11 - Optional cleat: SM-SH10 / SM-SH12 - Pedal Type: Road - Reflector: SM-PD65

When ripping down the trail, the last thing you need to worry about is if your helmet will protect you in a crash. Then again, you don't want to be stuck wearing a full-face on every trail ride. This is why we created the Ambush Comp—a lightweight, extended coverage helmet at a wallet-friendly price. Starting with protection, the Ambush Comp boasts a significant amount of extended coverage and a single density foam that's been reinforced by a Composite Matrix. The reason behind this is that it manages the energy from impacts more effectively. Even with the added protection, though, it fits comfortably with our low profile and fully integrated Mindset 360 fit system. And with its five height positions, this system provides unmatched adjustment, while an integrated dial allows for on-the-fly fine-tuning. The Ambush Comp also keeps you cool with our 4th Dimension Cooling System's massive vents and exhaust ports, so you don't have to worry about overheating—even on the hottest days. Finally, we included a micro-indexing visor that quickly adjusts positions and has plenty of room for goggle storage. Combined, these features put the Ambush Comp well in front of the competition. Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - MIPS-equipped. - Composite Matrix internal reinforcement allows large vents for greater cooling. - In-molded shell improves strength and reduces weight. - Mindset 360 fit system provides a secure, comfortable fit with 360-degree tension adjustment, five height positions, and integrated dial for easy on-the-fly adjustments. - Micro indexing visor allows for a wide range of fast, secure on-trail adjustments, as well as convenient goggle stowage. - 4th Dimension Cooling system optimizes ventilation. - Extended coverage for added protection and durability. - Tri-Fix web splitter for improved comfort and ease of strap adjustments. - This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor. - Our available aftermarket ANGi sensor gives you and your loved ones peace of mind like never before. When combined with our Specialized Ride app, the ANGi sensor will evaluate the forces acting on the helmet in the event of an accident and, if necessary, send a text message to your specified contacts with your location.

Whether your preference is for wearing bib tights over your favorite pair of bib shorts, or you're looking for something with cross-functional versatility this winter, our Element Tights with No Chamois will provide you with protection and comfort all winter long. To start, they're made from one of the most protective and warming materials in the business—our Element Soft Shell. This material is extremely wind- and water-resistant, and it's also highly efficient at wicking moisture away from the skin, while remaining soft against the skin and quite breathable. The fabric also possesses the perfect amount of stretch, which complements the articulated cycling cut of the bib tights. Essentially, this all adds up to a complete freedom of movement throughout the motions of cycling, and this equates to the elimination of any rubbing, pinching, or chafing. And to ease entry and exit of the bib tights, we've also included an eight-inch ankle zipper. The bib tights have been purposefully constructed without a chamois. The reason for this boils down to both preference and versatility. For cycling, you're able to layer them over your favorite pair of bib shorts for added warmth and predictable comfort. And for other winter sports like Nordic skiing or trail running, you'll find the close, warming fit of these tights to be the perfect match. - Element Soft Shell is a knit fabric with remarkable insulating properties, as well as being wind- and water-resistant and highly breathable. We've also included insulating Therminal panels in selective locations of the bib tights to further the overall warmth. - Articulated cycling fit is designed to complement the body throughout the positions and movements of cycling, which eliminates any unwanted pinching, rubbing, or chafing. - Ankle gaiter creates a tight seal with either shoes or covers, so cold air won't creep up the leg while you're riding. - Reflective elements increase your visibility to motorists in low-light conditions. - DeflectUV 50+ protects the skin against harmful UV rays.

Some days it's easy to get out for your morning ride. On other days it can be more of a challenge—especially if there's cold weather in the forecast. When winter threatens to keep you off your bike, zip up in our Men's Prime Alpha Jacket for the extra warmth you need to hit the road. Ideal for layering over a base layer and under a rain shell, this cycling jacket keeps you comfortable from start to finish thanks to lightweight Polartec Alpha insulation and breathable, moisture-wicking exterior fabric. - Breathable shell fabric moves moisture from the insulation to the exterior to keep you dry throughout your ride. - Three back pockets help keep your ride essentials right where you want them. - Polartec Alpha insulation keeps you warm, dry, and comfortable. - Fabric Content: SHELL A: 94% Nylon - 6% Spandex - SHELL B: 85% Nylon - 15% Spandex - LINING: 100% Recycled Polyester

Get ready to fly high with the Krypto DH pedals. Built tough with its CNC'ed aluminum body and self-lubricating bushings, this pedal makes a big statement on the trail with full laser graphics and premium finish. Ten strategically placed pins keep you in maximum control. - Body: CNC-machined 6061 Aluminum - Axle: CNC-machined Cro-Mo - Bearings: Ultralight self-lubricating sealed bushings - Replaceable pins - Size: 117mm x 110mm - Weight: 208 grams (each) - Dimensions: 11 x 20 x 7 cm

Some days it's easy to get out for your morning ride. On other days it can be more of a challenge—especially if there's cold weather in the forecast. When winter threatens to keep you off your bike, zip up in our Men's Prime Alpha Jacket for the extra warmth you need to hit the road. Ideal for layering over a base layer and under a rain shell, this cycling jacket keeps you comfortable from start to finish thanks to lightweight Polartec Alpha insulation and breathable, moisture-wicking exterior fabric. - Breathable shell fabric moves moisture from the insulation to the exterior to keep you dry throughout your ride. - Three back pockets help keep your ride essentials right where you want them. - Polartec Alpha insulation keeps you warm, dry, and comfortable. - Fabric Content: SHELL A: 94% Nylon - 6% Spandex - SHELL B: 85% Nylon - 15% Spandex - LINING: 100% Recycled Polyester

Inspired by Speedcraft's legendary success on cycling's biggest stages, S2 is 100% speed that has been newly refined for everyday sports performance. Our innovative technologies and signature lens have been tuned for riding at any level. S2's laser-etched edging provides the look of a full-frame in a rimless cylindrical shield, for 360-degree visibility and comfort. - Designed in California; made in Italy - High-impact resistant and lightweight polycarbonate lenses - 5.5-base cylindrical shield lens for increased peripheral view and protection - 360 degree visibility for unobstructed views and optimal field of vision - Interchangeable scratch-resistant lenses provide 100% UV protection - Lower air scoops to increase ventilation while reducing moisture on the lens - HYDROILO lens treatment repels water, dirt and oil - Durable, flexible and lightweight TR90 frame - Ultra-grip rubber nose pads and tips for a secure fit no matter how much you sweat - Comes with a hard case, microfiber cleaning bag, alternate fit nose pad and clear replacement lens

Essential Urban Waterproof Protection A performance cycling jacket that is designed to be seen. A 2.5 layer fabric and huge reflective panels keep you comfortable and give other road users no excuse when it comes to spotting you in low light conditions.*Not intended for use as Personal Protection Equipment (PPE) 360 Degree Reflectivity - Large reflective prints or panels catch vehicle headlights, boosting visibility in low light conditions. Carefully measure positioning looking at driver eye level, 360-degree coverage, and using moving parts of the body to increase effectiveness. - Lightweight breathable 2.5-Layer waterproof fabric in a fully seam-sealed construction - Strategically positioned large reflective panels provide nighttime visibility - Bonded and laser-cut double storm flap on center zip - Concealed hem adjusters - Zipped chest pocket and handwarmer pockets with cozy-touch microfleece - Bonded laser-cut double storm flap on center zip - Large underarm vents for temperature regulation - Keeping you dry and visible on the tough city streets

- MIPS' added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - Dual-density Varizorb EPS provides improved protection by spreading forces of impact across a wider area - 8 Big Bore vents and 7 exhaust vents keep you cool and aid in moisture management - The securely fixed visor is positioned to channel airflow into the Big Bore vents - Fidlock SNAP helmet buckle provides quick and secure entry and exit while wearing gloves - Removable antimicrobial and moisture wicking liner - Includes additional pads for custom dialed fit - EPS, PC, PA, Epp, Polyester