Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Complete Component Catalog

$80.95 - $469.99
The Verdict family presents our most aggressive front-focused tires for days where relentless traction takes priority over rolling efficiency. Tall, chunky knobs dig deep into soft terrain regardless of how loose or sloppy it may be. Abundant open space between all knobs gives them room to dig through the driest days of summer and fling mud in the wettest months. The Verdict family is guilty of holding it down through off-camber corners and chundery descents. Verdict is the do-it-all spike designed to handle loose, technical trails. Its toothy knobs dig into soft terrain and grapple through rocks and roots. Dry and dusty during the loose summer months in California, Colorado or Italy? Go with the Verdict. PAIR IT WITH A JUDGE The Judge 2.4 rear tire compliments their usage with equally robust knobs that emphasis claw-like braking traction while also keeping rolling efficiency in mind. Looking to keep the front upright while you steer with the rear? That’s what you get with the Verdict/Judge combo. TRITEC AND SLASH GUARD: Verdict and Verdict Wet feature TriTec Compound, which utilizes three rubber compounds to provide different levels of traction, support, and durability based on their placement within the tread. The entire tread pattern is supported by a base of supportive rubber, which transitions halfway into the height of the knobs and allows for the use of softer knob compounds without folding under cornering forces. The tops of the center knobs consist of an intermediate compound to provide traction and durability without sacrificing rolling efficiency. Outer knobs feature a soft compound that delivers maximum grip and slow rebound. All TCS Light versions of the new Verdict tires feature Slash Guard technology, which incorporates a protective nylon insert spanning the entire sidewall to provide extra protection without the weight of a dual-ply casing. Verdict Wet is only available with a TCS Tough casing, and therefore, isn’t available with Slash Guard. FEATURES: - The Verdict tread pattern excels in loosest, rowdiest conditions where relentless traction takes priority over rolling efficiency. - Abundant open space between all knobs allows the tread pattern to dig through the driest days of summer and fling mud in the wettest months. - Pair it with the Judge 2.4 as a rear tire for claw-like braking traction that matches the tenacious grip of the Verdict tread. - Optimized for use with i29 rims.
$83.95 - $459.99
The Verdict family presents our most aggressive front-focused tires for days where relentless traction takes priority over rolling efficiency. Tall, chunky knobs dig deep into soft terrain regardless of how loose or sloppy it may be. Abundant open space between all knobs gives them room to dig through the driest days of summer and fling mud in the wettest months. The Verdict family is guilty of holding it down through off-camber corners and chundery descents. Verdict is the do-it-all spike designed to handle loose, technical trails. Its toothy knobs dig into soft terrain and grapple through rocks and roots. Dry and dusty during the loose summer months in California, Colorado or Italy? Go with the Verdict. PAIR IT WITH A JUDGE The Judge 2.4 rear tire compliments their usage with equally robust knobs that emphasis claw-like braking traction while also keeping rolling efficiency in mind. Looking to keep the front upright while you steer with the rear? That’s what you get with the Verdict/Judge combo. TRITEC AND SLASH GUARD: Verdict and Verdict Wet feature TriTec Compound, which utilizes three rubber compounds to provide different levels of traction, support, and durability based on their placement within the tread. The entire tread pattern is supported by a base of supportive rubber, which transitions halfway into the height of the knobs and allows for the use of softer knob compounds without folding under cornering forces. The tops of the center knobs consist of an intermediate compound to provide traction and durability without sacrificing rolling efficiency. Outer knobs feature a soft compound that delivers maximum grip and slow rebound. All TCS Light versions of the new Verdict tires feature Slash Guard technology, which incorporates a protective nylon insert spanning the entire sidewall to provide extra protection without the weight of a dual-ply casing. Verdict Wet is only available with a TCS Tough casing, and therefore, isn’t available with Slash Guard. FEATURES: - The Verdict tread pattern excels in loosest, rowdiest conditions where relentless traction takes priority over rolling efficiency. - Abundant open space between all knobs allows the tread pattern to dig through the driest days of summer and fling mud in the wettest months. - Pair it with the Judge 2.4 as a rear tire for claw-like braking traction that matches the tenacious grip of the Verdict tread. - Optimized for use with i29 rims.
$99.95 - $200.00 $200.00 Up to 50% Off
This replacement seatpost for the Shiv Disc ensures the perfect fit with two different setback options— 0mm and 25mm. - Aerodynamic FACT carbon construction that's compatible with the Shiv Disc. - Profile that integrates with the shape of the rear Hydration Fuelcell for maximum aerodynamic performance. - Cylindrical aluminum head assembly adjusts fore/aft and tilt with a single bolt. - Setback: 0/+25mm
$100.99 - $225.00
Shimano's Sora Dual Control Levers offer smooth shifting and confident braking. The hoods are ergonomically contoured for a comfortable grip and easy access to shifting controls from any handlebar position. Top-view gear indicators ensure you know which gear you're in at all times.
$121.50 - $211.50
Do you ride in a wide range of winter conditions? Dillinger is one of the best winter fat bike tires for mixed conditions, thanks to its balance of speed and traction to help you stick to your line without slowing you down. And with optional studs, you’ll never slip, slide, or lose control on ice. Details: - Fast-rolling center tread for carrying speed - Large, braced side lugs for predictable cornering performance - Available with 168 Large Concave Carbide Aluminum Studs, 168 Carbide Steel Studs, or a custom-studdable tread for tuning your own stud pattern - 60 TPI and 120 TPI casing options - Tubeless-ready for supple ride quality, more grip, and weight savings - We design 45NRTH tires for extreme winter cycling applications. We do not recommend using this product with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.
$121.50 - $234.00
The extra width of the Dillinger 5 provides flotation over loose snow additional grip while turning, accelerating or braking on ice and packed snow. Available in both studded and non-studded configurations. The studded version comes with 258 concave, aluminum carbide tip studs to provide extra bite and increased durability. - Carbide studs grip ice - Braced side lugs improve cornering - Tubeless Ready - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.
$135.00
Dillinger 4 is a fast traction studded fat bike tire. The tightly spaced center tread rolls quickly, while taller, braced side lugs improve cornering in snowy conditions. Carefully positioned studs allow for railing icy, off-camber singletrack with confidence and control. - Braced side lugs for improved cornering - Directional center lugs for rolling speed and braking traction - Replacement studs and stud insertion tool sold separately - Custom studdable up to 252 studs - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss. - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use
$139.99 - $219.99
Shimano's Tiagra Dual Control Lever (2x10-speed) is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. -Model Number: ST-4700 - Series: Tiagra - Cassette Compatibility: 10-speed - Front Shifting: 2 - Shift Cable: Lever side:OT-SP41 / RD side: OT-SP41 Sealed - Reach Adjuster: Screw
$157.50 - $207.00
From loose snow to icy freeze-thaw and everything in between, Wrathchild craves the best and worst winter conditions. Deep center lugs aggressively claw into unconsolidated snow for extreme acceleration and braking traction. Super tall side lugs dig into loose snow to provide predictable and confident cornering. Encounter sheer ice on your ride and Wrathchild’s concave studs tear into the surface. - Deep, aggressive lugs dig into snow - Tall side lugs provide cornering confidence - 252 concave studs tear into slick surfaces - Tubeless ready - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss
$164.00 - $212.00
Whether your target is high speed or big air, an unwavering focus on dependability and style can never be overlooked. Blending the experience of countless DH podiums, big mountain competitions and film sessions, the new Descendant DH crank brings clock-beating weight savings to freeride burliness—at a price that will leave money for the next adventure. Meet your gravity goals—Descendant. - Arm Material: Aluminum - Chainring Material: Aluminum - Available Arm Lengths: 165mm, 170mm - Compatibility: Any 1x drivetrain - Colors: Black - BCD: 94mm - Bottom Bracket: GXP 83mm/PF GXP 104.5/107mm, PF30 83mm - Chainrings: 34T X-SYNC - Interface: 24mm, 30mm - Chainline: 57.0mm
$173.99 - $369.99
Shimano Ultegra R8000 dual control levers. - Greater reach adjust range - Quick and intuitive rear shifting operation with redesigned internal shifting unit - Even lighter front shifting when paired with redesigned FD-R8000 - 2x11-speed - Model Number: ST-R8000 - Series: Ultegra - Shift Cable Casing: OT-SP41 - Shift Cable: Polymer coated - Average Weight: 220 grams
$174.99 - $249.99 $249.99 Up to 30% Off
Expanding on our award-winning Dominion A4. Our newest brake, Dominion A2, targets Cross Country and Trail riders. Dominion A2 features a two-piston caliper. Dominion A2 includes all the performance from the Dominion A4, utilizing a compact, two-piston caliper. With the SFL option, the Dominion is the ideal brake option for any rider with smaller hands. Hayes product development team set out to design a brake system specifically designed for a smaller ergonomic profile. Dominion SFL maintains all the power and feel of our proven Dominion A4, and accomplishes this using a specifically designed smaller and narrower brake lever. Dominion SFL can be used in conjunction with either our Dominion A2 two-piston caliper or our Dominion A4 four-piston caliper. With optional lever sizes and two caliper choices, Dominion from Hayes Disc Brake now offers a brake that's ideal for your application. Dominion A2 features the proprietary QuickBite² system for fast and consistent burnish, coupled with our D-Series rotor to manage the heat with less braking noise. Available in SFL (Small Finger Lever)—ergonomically tailored for the smaller hand. Key Features: - Tool-Free Reach Adjustment - Flip-Flop Lever Orientation - King Pin Pad Retention - Crosshair Caliper Alignment - Two-Stroke Dual-port bleed system Specifications: - 303g (100cm hose and mount hardware) - DOT 5.1 Fluid - Tool-Free Reach Adjustment - 2-Stroke Dual Port Bleed System - Sealed Cartridge Bearings Lever Pivot - 100cm Front Hose Length - 180cm Rear Hose Length
$174.99 - $249.99 $229.99 - $249.99 Up to 30% Off
Expanding on our award-winning Dominion A4. Our newest brake, Dominion A2, targets Cross Country and Trail riders. Dominion A2 features a two-piston caliper. Dominion A2 includes all the performance from the Dominion A4, utilizing a compact, two-piston caliper. With the SFL option, the Dominion is the ideal brake option for any rider with smaller hands. Hayes product development team set out to design a brake system specifically designed for a smaller ergonomic profile. Dominion SFL maintains all the power and feel of our proven Dominion A4, and accomplishes this using a specifically designed smaller and narrower brake lever. Dominion SFL can be used in conjunction with either our Dominion A2 two-piston caliper or our Dominion A4 four-piston caliper. With optional lever sizes and two caliper choices, Dominion from Hayes Disc Brake now offers a brake that's ideal for your application. Dominion A2 features the proprietary QuickBite² system for fast and consistent burnish, coupled with our D-Series rotor to manage the heat with less braking noise. Available in SFL (Small Finger Lever)—ergonomically tailored for the smaller hand. Key Features: - Tool-Free Reach Adjustment - Flip-Flop Lever Orientation - King Pin Pad Retention - Crosshair Caliper Alignment - Two-Stroke Dual-port bleed system Specifications: - 303g (100cm hose and mount hardware) - DOT 5.1 Fluid - Tool-Free Reach Adjustment - 2-Stroke Dual Port Bleed System - Sealed Cartridge Bearings Lever Pivot - 100cm Front Hose Length - 180cm Rear Hose Length
$199.00 - $397.00
Comfort plays a big part in speed—that's why SRAM designed the Force 22 ErgoDynamic Shifters with an ErgoFit textured body and refined hood shape that improve grip and provide a smooth transition to the bar. These 2x11-speed shifters are crafted with carbon and magnesium for an incredibly low weight you'll notice as soon as you wrap your hands around them. Individual reach adjustment of the ErgoBlade brake and shift levers put the controls exactly where you want them. And, with an understated black finish, the Force 22 Shifters are a great match for any machine.
$199.50 - $267.50 $199.50 - $267.50 Up to 19% Off
The OneUp Dropper post is available in 120mm, 150mm, 180mm and 210mm lengths and all can be shimmed down in travel by 10 or 20mm. We've been obsessed with shaving every last millimeter from the latest OneUp post to give you the the shortest stack height and shortest total length of any dropper post. No other post can get your saddle lower. Starting from $199 USD with free shipping worldwide, cable actuated with reliable sealed cartridge internals for easy home servicing and includes travel adjust shims allow you to custom tune your post to dial in your perfect length. The dropper market is dominated by expensive big brand posts and generic catalog shopped posts with different logos. We want to offer something better, a post with class leading specs, innovative useful features AND real value. Want more from your dropper? Get OneUp. FEATURES - Travel adjust shims allow you to custom tune your post to dial in your perfect length. - Cable actuated for easy installation and a simple no bleed remote - Ergonomic remote paddle position - Reliable sealed cartridge internals - User replaceable cartridge only $60 USD - Easy to service at home - 2 year warranty UPDATES - Shortest total length of any dropper - Shortest stack height of any dropper - New upper DU Bushing in the upper collar - Increased bushing overlap and durability - 100-210mm post lengths in 10mm increments. - 20g lighter SPECS - Drop 120mm, 150mm, 180mm, 210mm adjustable*. - Diameter 30.9, 31.6, 34.9 - Routing Internal only Remote Compatibility: - SRAM Matchmaker X - SRAM MMX clamps - Shimano I-spec-EV - 12 speed XTR M9100, XT M8100 and SLX M7100 - Shimano I-spec II - 11 speed XTR M9000, XT M8000, SLX M8000 only - 22.2mm Bar Clamp - All other groups 10 speed SHIMANO - Cable clamping remote only (post requires cable stop to be assembled at base of post) - Travel Reducing Shim Reduces travel by up to 20mm. Weight Post Only - (30.9) 120mm 435g / 150mm 480g / 180mm 525g / 210mm 570g - (31.6) 120mm 450g / 150mm 500g / 180mm 545g / 210mm 590g - (34.9) 120mm 545g / 150mm 605g / 180mm 660g / 210mm 710g Remote Only - Remote with 22.2mm Bar Clamp - 46g - Remote with SRAM Matchmaker X / I-spec-EV - 43g - Remote with Shimano I-spec-EV - 43g - Remote with Shimano I-spec II - 41g - Housing and Cable (1300mm installed length) - 50g
$199.99 - $200.00
The Perfect Reflection of You. The Power Expert with Mirror saddle combines comfort and performance for riders whether they are podium-seeking crushers or everyday cruisers. The Body Geometry designed Power shape with high-tech Mirror inserts provide sit bone-friendly support road to mountain uses. ATTAINABLE TECH: The Power Expert with Mirror saddle provides riders with a significant reduction in pain-causing pressure when compared to it's foam counterpart, the Power Comp Saddle. Inside the saddle are two tear drop shaped Mirror Technology inserts that target sit bone pressure. Riders around the world will be stoked that the new Expert level Power Saddle with Mirror technology make these benefits more attainable than ever. POWER SHAPE: Our beloved Power shape, with a cutout. The patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. Is it a road saddle? Mountain saddle? In short, yes. We hate to say a product works "for everything", but it does. We believe that performance-in saddle speak-means comfort. And whatever shape and material suits you, will be your highest performing saddle. MIRROR TECHNOLOGY: We developed Mirror technology by 3D printing from a liquid polymer to be a perfect reflection of you. Mirror technology allows for infinite density tuning with a single material, but any material is only as good as the designers and engineers that use it. Thanks to our Body Geometry methodology, Retul data, and decades of experience, the 3D-printed matrix is tuned to support the sit bones across a greater area, creating a hammock effect that lets the saddle support your weight, not the tissue around your sit bones. ANY BODY, EVERY RIDE: We know that every body is different, but the issues facing riders in the saddle are the same—sit bone pressure, scar tissue build-up, and blood flow loss. Using pressure mapping, blind comfort studies, and blood flow studies, Body Geometry and Mirror Saddles don't just promise to solve these issues for people-we've proven they do. Plus, this is the first saddle with Mirror technology in additional sizes (130 and 168). ALL AROUND USE: The Power Expert With Mirror saddle uses the same 3D printed technology as the S-Works Power with Mirror except the Expert has 4-way stretch cover to keep mud and debris out of the nooks and crannies of the Mirror lattice. That dirt-shedding feature, plus super durable, yet light weight hollow titanium rails make the Power Expert with Mirror the smart choice for gravel and mountain riders, in addition to those who stick to paved surfaces. Web Bullets - Patented Body Geometry design is lab-tested to ensure improved comfort and blood flow to sensitive arteries. - Mirror technology inserts to provide additinal sit bone relief. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Lightweight and durable hollow Ti rails. - Supportive and lightweight PU foam surrounding the 3D printed inserts. - Size 130mm / Weight: 210g - Size 143mm / Weight: 214g - Size 155mm / Weight: 225g - Size 168mm / Weight: 227g
$200.00 - $225.00
The Phenom Pro is a mountain bike saddle that's designed with Specialized's Adaptive Edge base construction, allowing the outer edge to conform to your body for a near-custom fit. Lightweight and expertly tuned for stiffness and efficiency, the Phenom features a rounded, anti-snag tail, and the perfect amount of padding for mountain riding. - Patented Body Geometry Design is lab tested to assure blood flow to sensitive arteries. - Carbon-reinforced shell with flexible Adaptive Edge technology adapts to your body for a near-custom fit and all-day comfort. - Low friction panels on the nose and tail improve pedaling efficiency and mobility while moving ‘on and off’ the saddle. - Ultra-light and strong, oversized FACT carbon rails. - Lightweight and supportive PU foam for increased comfort on longer rides. - Level 2 padding: Medium density foam for bike feel with additional - SWAT compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Size 143mm / Weight 193g - Size 155mm / Weight 205g
$202.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 17mm - Outer Diameter: 30mm - Width: 7mm
$202.00
With shaft and head formed from one continuous carbon fiber section, the K-Force Light SB0 seatpost is both light and strong. The K-Force Light SB0 features a zero-offset (in-line) clamp for a forward saddle position, with our forged alloy Minimal Top Clamp holding the saddle securely. - Forged alloy Minimal Top Clamp (MTC) - Increased setback for correct fit and saddle support - One-piece continuous carbon fiber construction - M5 chromoly and stainless steel hardware design - Zero Setback - Fits 7mm standard rails and 7x9mm oval rails - 185 grams
$202.99
With SHIMANO's SLR-EV dual symmetric pivot design, the short-arm DURA-ACE R9200 series caliper brakes employ twin bearings and a roller to realize greater efficiency and deliver superior modulation and stopping power. They are offered in traditional and direct mount options. - Exceptional balance of rigidity, weight and stopping power - Maximum tire size: 28C - Lightweight magnesium brake shoe holder
$202.99
With SHIMANO's SLR-EV dual symmetric pivot design, the short-arm DURA-ACE R9200 series caliper brakes employ twin bearings and a roller to realize greater efficiency and deliver superior modulation and stopping power. They are offered in traditional and direct mount options. - Exceptional balance of rigidity, weight and stopping power - Maximum tire size: 28C - Lightweight magnesium brake shoe holder
$204.95
Campagnolo strives to always offer the best solutions, no matter what frame or tire the cyclist has chosen. As manufacturers begin to develop frames and fork designs that take advantage of the aerodynamic gains of direct mount brakes, the Campy Tech Lab has worked to make new Campagnolo Direct Mount brakes that can guarantee the Campagnolo quality and performance standards. Through the self-balancing design, this new braking system by Campagnolo provides a completely symmetric and efficient brake application. In addition, the extremely stiff structure of the new Campagnolo Direct Mount brakes ensures superior stopping power, whilst the design elements take inspiration from the aerodynamics of the brake and are enhanced by the new sealed structure of the brake levers themselves. In addition to pure performance, a great deal of attention was given to ease of use and adjustment. The goal was to guarantee that the Campagnolo brake would be both easier to fit and intuitive and simple to adjust compared to any model available. That was made possible through the stiff structure positioned in the rear part of the brake, enabling rapid fitting that does not require external brake boosters, even on the weakest chainstays.
$204.99
FULL PIN technology uses ten lightweight, stamped steel cogs and one 42t aluminum cog held together with 123 high-strength stainless steel pins. The result: a cassette that’s light, durable and equipped with SRAM’s super wide 10-42 gear range that’s a perfect fit for any ride. The open design similar to SRAM's X-DOME cassette aids in mud clearance, giving you cleaner shifting performance and longer component life. - FULL PIN technology uses ten lightweight, stamped steel cogs and one 42t aluminum cog held together with 123 high-strength stainless steel pins - Super wide 10-42t gear range—a perfect fit for any ride - Optimized gear steps across entire range - Open design aids in mud clearance - XD driver body creates more stable hub connection - Cassette Body Type: SRAM XD 11/12 Speed - Cassette Cogs: 10-12-14-16-18-21-24-28-32-36-42 - Drivetrain Speeds: 11 - Weight: 325 g
$209.99
Our Box Three tier delivers many of the same capabilities of its more famous siblings yet it's built upon a simpler platform. Cassettes are accessible at 11-46T or 11-50T and fashioned with steel spiders. The derailleur exploits our Limited Slip clutch technology without the Tri-pack features. Shift easily with a comparable mechanism, although you'll forgo the hinged clamp and die-cast structure. And lastly, string it all together with a Prime 9 chain but without extravagant coatings. If you're looking to bring your 2/3 by bike into the 21st century, then level up with this group!
$209.99
M110 drop bar shifter levers allow for the use of a Shimano Shadow Plus 11-speed rear derailleur with road handlebars to create a drop bar 1x11 setup. They feature the same reliable, easy-to-use shift mechanism found on microSHIFT's R-Series shift levers. - Includes cable and housing - Separate dedicated lever for up- and down-shifts - Replaceable hood cover and face plate - External shift cable routing for low friction, smooth response and easy cable and housing replacement - Left lever has no shifter parts for a clean, dedicated 1x setup - Compatible 11-speed MTB rear derailleurs include Shimano DynaSys and microSHIFT XCD/XLE
$209.99
With SHIMANO's SLR-EV dual symmetric pivot design, the short-arm DURA-ACE R9200 series caliper brakes employ twin bearings and a roller to realize greater efficiency and deliver superior modulation and stopping power. They are offered in traditional and direct mount options. - Exceptional balance of rigidity, weight and stopping power - Sleek and integrated low-profile caliper design - Maximum tire size: 28C - Lightweight magnesium brake shoe holder
$209.99
With SHIMANO's SLR-EV dual symmetric pivot design, the short-arm DURA-ACE R9200 series caliper brakes employ twin bearings and a roller to realize greater efficiency and deliver superior modulation and stopping power. They are offered in traditional and direct mount options. - Exceptional balance of rigidity, weight and stopping power - Sleek and integrated low-profile caliper design - Maximum tire size: 28C - Lightweight magnesium brake shoe holder
$209.99 $259.99 19% Off
Shimano Saint hydraulic disc brakes feature an opposed ceramic 4-piston design which helps absorb rotor heat and reduce vibrations. The Servo Wave 2-finger levers feature tool-free stroke and position adjustment, while the one-way bleeding caliper and hinged lever clamp offer easy installation and maintenance. - Brakes are pre-bled for convenient installation - Includes metal ICE TECH pads with radiator fins - I-spec B-type shift lever compatible
$209.99 - $479.00 $210.00 - $479.00 On Sale
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Arch S1 Wheelset - Use: Trail and Enduro - Internal Rim Width: 26mm - Optimal Tire Size: 2.25 to 2.5-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 27.5-inch (1,882g) and 29-inch (1,974g)
Page 1 of 10 Next page